CIDEX OPA 3.78 L GALON 4CS 20391

Product Overview

CIDEX OPA Solution is a leading high-level disinfectant developed by BD, designed for reprocessing heat-sensitive, semi-critical medical devices. Known for its effectiveness and reliability on platforms like Nahdi Online, , and , this advanced solution effectively kills a wide range of microorganisms, including bacteria, viruses, and fungi, ensuring optimal infection control in healthcare environments. Its primary active ingredient is 0.55% ortho-phthalaldehyde (OPA), providing fast and dependable disinfection. Healthcare professionals worldwide trust CIDEX OPA Solution for its consistent performance and material compatibility. It is commonly used for endoscopes, ultrasound probes, respiratory therapy equipment, and other delicate instruments that cannot withstand high-temperature sterilization.

Benefits of Use

• Rapid High-Level Disinfection: Achieves high-level disinfection in minutes at room temperature, enhancing productivity in busy medical settings.
• Broad-Spectrum Efficacy: Effective against a wide range of microorganisms, including mycobacteria, viruses (HIV, HBV, HCV), bacteria, and fungi.
• Excellent Material Compatibility: Designed to be gentle on delicate and complex medical instruments, including endoscopes, reducing damage and extending device life.
• Long Reuse Life: Offers a reuse life of up to 14 days when properly monitored with CIDEX OPA Solution Test Strips, providing cost-effectiveness.
• Low Vapor Pressure: Minimizes the potential for airborne exposure compared to glutaraldehyde-based sterilants.

How to Use

1. Pre-clean Devices: Thoroughly clean devices with an appropriate detergent to remove all organic matter and visible debris. Rinse thoroughly with water.
2. Drain Excess Water: Ensure devices are free of excess water before immersing them in CIDEX OPA Solution.
3. Immerse Devices: Completely immerse clean, rinsed devices in CIDEX OPA Solution. Ensure all surfaces, lumens, and channels are filled with the solution, eliminating any air pockets.
4. Soak Time: Refer to the device manufacturer's instructions for the specific contact time required for high-level disinfection, typically 5-12 minutes at 20°C, or as per local guidelines.
5. Rinse Thoroughly: After the required contact time, remove devices from the solution and rinse them thoroughly by immersing them in at least three separate rinses of sterile or potable tap water, each for a minimum of one minute.
6. Dry and Store: Completely dry devices and store them in a manner that prevents recontamination before use.

Cautions & Warnings

• Wear appropriate Personal Protective Equipment (PPE), including impervious gloves, eye protection, and protective clothing when handling CIDEX OPA Solution.
• Use in a well-ventilated area to minimize vapor exposure. Ensure adequate air exchange rates are maintained.
• Avoid contact with skin, eyes, and clothing. In case of contact, rinse immediately with plenty of water and seek medical advice.
• Do not mix CIDEX OPA Solution with other chemicals, especially glutaraldehyde or peracetic acid.
• Dispose of spent solution according to local, state, and federal regulations. A neutralizing agent may be required prior to disposal.
• Keep out of reach of children. Not for use on or in the human body.
• Always refer to the Instructions for Use (IFU) accompanying the product for complete safety information and detailed reprocessing procedures.

Ingredients

Active Ingredient: Ortho-phthalaldehyde (OPA) 0.55%

Inactive Ingredients: Water and other components to stabilize the solution.

Product Details

Volume: 3.78 Liters (approximately 1 US Gallon)

Formulation: Ready-to-use liquid solution

Color: Light blue tint

Storage: Store at controlled room temperature, away from direct sunlight.