DELTALITE PLUS Synthetic Fibreglass Casting Tape

The DELTALITE PLUS Synthetic Fibreglass Casting Tape is an advanced orthopedic solution designed for durable and comfortable immobilization.

Manufactured by Essity (formerly BSN Medical), this high-quality casting tape is engineered with a synthetic fibreglass substrate impregnated with a water-activated polyurethane resin, providing superior strength, lightweight comfort, and excellent conformability for various orthopedic applications.

Ideal for treating fractures, sprains, and providing post-operative support, DELTALITE PLUS ensures reliable and long-lasting stabilization.

Its open-weave design promotes breathability, and the smooth finish enhances patient comfort while reducing snagging on clothing or bedding.

The tape is radiolucent, allowing for clear X-ray imaging without the need for cast removal, which streamlines the diagnostic process.

Benefits of Use

• Superior Strength & Durability: Provides robust support and long-term immobilization for effective healing.
• Lightweight Comfort: Significantly lighter than traditional plaster casts, enhancing patient mobility and comfort.
• Excellent Conformability: Easily molds to body contours, ensuring a precise and snug fit that minimizes pressure points.
• Radiolucent: Allows for clear X-ray visualization without removing the cast, facilitating efficient follow-up assessments.
• Breathable Design: The open weave promotes air circulation, reducing skin maceration and improving hygiene.
• Water-Resistant: While not fully waterproof, the material offers resistance to moisture, making it more practical for daily life.
• Fast Setting Time: Sets quickly, allowing for rapid application and patient turnaround.

How to Use

1. Prepare the Limb: Ensure the affected limb is clean, dry, and free from any open wounds. Apply appropriate stockinette and padding (e.g., Delta-Net, Delta-Dry) to protect the skin and bony prominences.
2. Don Gloves: Always wear medical gloves during application to prevent resin adhesion to the skin.
3. Activate the Tape: Immerse the DELTALITE PLUS roll in room temperature water (20-24°C) for 5-10 seconds, squeezing gently to ensure complete saturation.
4. Remove Excess Water: Squeeze out excess water firmly but gently.
5. Apply the Tape: Begin wrapping the tape circumferentially around the limb, starting from distal to proximal, with approximately 50% overlap. Maintain even tension to avoid constriction.
6. Mold the Cast: Within the working time (typically 3-5 minutes), mold the cast to the desired anatomical shape, paying attention to bony prominences and functional positions.
7. Allow to Set: The cast will be rigid enough for weight-bearing (if applicable) within 20-30 minutes and fully cured within 24 hours.
8. Smooth Finish: Ensure a smooth outer surface to prevent snagging and enhance comfort.

Caution & Warnings

• Professional Use Only: DELTALITE PLUS casting tape should only be applied by trained medical professionals.
• Skin Protection: Always use appropriate padding and stockinette to protect the patient's skin from direct contact with the casting tape and to prevent pressure sores.
• Temperature Control: Use room temperature water for activation. Hot water will accelerate the setting time, while cold water will slow it down.
• Avoid Over-Tightening: Ensure the cast is applied with appropriate tension to prevent neurovascular compromise.
• Ventilation: Apply in a well-ventilated area due to potential odors during the setting process.
• Storage: Store rolls flat in a cool, dry place and ensure packaging is intact to prevent premature activation.
• Disposal: Dispose of used materials according to local medical waste regulations.

Ingredients

• Synthetic Fibreglass (Polyester/Polypropylene blend)
• Water-activated Polyurethane Resin

Product Details

• Brand: DELTALITE PLUS
• Manufacturer: Essity (formerly BSN Medical)
• Type: Synthetic Fibreglass Casting Tape
• Dimensions: 12.5cm x 3.6m (5 inches x 4 yards)
• Color: Green
• Product Code (IBC): 7345828