DELTALITE PLUS Synthetic Fibreglass Casting Tape 7.5cmx3.6m Mixed Colours 2 Dark Blue 2 Light Blue 2 Red 2 Pink 2 Purple 7345851

DELTALITE PLUS Synthetic Fibreglass Casting Tape – Mixed Colours

Benefits of Use:

• Superior Strength: Offers exceptional rigidity and support for secure immobilization of injuries.


• Lightweight Comfort: Significantly lighter than traditional plaster casts, enhancing patient comfort and mobility during recovery.


• Radiolucent: Allows for clear X-ray imaging without the need for cast removal, enabling easier monitoring of fracture healing.


• Easy Application & Removal: Features a smooth application process and can be easily removed with a standard cast saw.


• Water-Resistant: Once fully cured, it resists moisture, allowing for limited contact with water (e.g., showering with caution), though full submersion requires additional waterproof covers.


• Aesthetic Appeal: The mixed colours provide a more positive and personalized casting experience, particularly beneficial for children.


• Breathable Structure: The porous design allows for some air circulation, which can help reduce skin maceration under the cast.

How to Use:

1. **Prepare the Limb**: Ensure the patient's skin is clean and dry. Apply appropriate stockinette and padding (e.g., Delta-Net, Delta-Dry) to protect the skin and bony prominences.


2. **Wear Gloves**: Always wear protective gloves (latex or nitrile) as the resin is sticky and can irritate skin.


3. **Activate the Tape**: Submerge the DELTALITE PLUS roll in room temperature water (21-24°C) for 5-10 seconds, squeezing gently 2-3 times to ensure saturation.


4. **Remove Excess Water**: Squeeze out excess water to activate the polyurethane resin. Avoid over-squeezing.


5. **Apply the Cast**: Apply the tape smoothly and evenly around the limb, overlapping each layer by one-half to two-thirds the width of the tape. Mold and conform the cast to the patient's anatomy while maintaining the desired immobilization position.


6. **Smooth and Finish**: Smooth the surface to ensure good lamination between layers. Avoid wrinkles or creases for a comfortable and strong cast.


7. **Curing Time**: The cast begins to set in 3-5 minutes and becomes weight-bearing in approximately 20-30 minutes, achieving full strength in 24 hours.

Caution & Warnings:

• **For Professional Use Only**: This product is intended for application by trained healthcare professionals.


• **Skin Protection**: Always use appropriate skin protection (stockinette, padding) to prevent skin irritation or pressure sores. Do not apply directly to skin.


• **Ventilation**: Ensure proper ventilation during application to avoid inhalation of fumes from the resin.


• **Eye & Skin Contact**: Avoid contact with eyes and mouth. In case of contact, flush immediately with water and seek medical attention. Wear protective gloves at all times during application.


• **Water Exposure**: While water-resistant, standard fibreglass casts require careful water management. Do not immerse fully in water unless using a specific waterproof casting system/liner.


• **Patient Monitoring**: Monitor the patient for signs of neurovascular compromise, pressure sores, or skin irritation post-application.


• **Storage**: Store in a cool, dry place and ensure packages are sealed until use, as exposure to moisture or air can prematurely harden the tape.

Ingredients:

• Fibreglass fabric impregnated with a water-activated polyurethane resin.

Product Details:

• **Dimensions**: 7.5 cm x 3.6 m (3 inches x 4 yards)


• **Material**: Synthetic Fibreglass


• **Colors**: Mixed (2 Dark Blue, 2 Light Blue, 2 Red, 2 Pink, 2 Purple)


• **Setting Time**: Initial set in 3-5 minutes, functional strength in 20-30 minutes, full strength in 24 hours.


• **Radiolucent**: Yes


• **Manufacturer**: BSN Medical (an Essity company)